EZGO Lift Kits: 2 Inch to 5 Inch Selection and Installation Guide

An EZGO lift kit raises a TXT, RXV, or Valor frame by 2 to 5 inches so the cart clears rougher ground and runs taller tires.

New 22 inch tires rub the fender on a full turn.

A stock cart scrapes its undercarriage on a gravel drive.

A kit ordered without checking the powertrain arrives with brackets that do not line up.

Nothing kills the excitement of an upgrade faster than parts that sit in the box for a month.

Lift height, model year, and gas versus electric layout decide which kit bolts on cleanly. EZGO builds the RXV and Valor on a different geometry than the TXT, so kits never cross over.

Three problems show up again and again:

1. Tires that rub because the lift is too short for the tire diameter.
2. A gas kit ordered for an electric cart, or the reverse, that will not mount.
3. Hardware left loose after installation, which lets the cart wander at speed.

Carts & Parts, an authorized E-Z-GO dealer, matches every kit to the serial number before shipping. The guide below covers every EZGO lift kit from 2 inches to 5 inches, plus tire pairing and safe installation.

Key Takeaways

Which EZGO lift kit fits a TXT?

The OEM EZGO TXT 2-Inch Lift Kit (PN# 611889) fits gas and electric TXT models and adds 2 inches of ground clearance. The kit keeps factory style geometry for daily driving and light trail use.

Which EZGO lift kit fits a 2022 to 2025 RXV or Valor?

The OEM EZGO 4-Inch Lift Kit (PN# 10047543) fits RXV and Valor carts with the EX1 gas engine, and the OEM EZGO 4-Inch Lift Kit (PN# 10047547) fits the electric versions. Both kits allow 23 inch tires.

What is the tallest OEM lift for an electric RXV?

The OEM EZGO RXV 5-Inch Ultimate Lift Kit (PN# PF11705) is the tallest factory kit, adding 5 inches of clearance on 2013.5 and newer electric RXV carts. Installation is bolt on with no cutting or welding required.

How tall can tires go on an unlifted EZGO?

An unlifted EZGO TXT accepts tires up to 20 inches in overall diameter. Tires near 22 inches need roughly a 3 inch lift, and 23 inch tires need a 4 to 6 inch lift depending on the model.

What Does an EZGO Lift Kit Change on the Cart?

An EZGO lift kit replaces the front spindles and the rear axle brackets to move the frame farther from the ground. The kit does not change the wheelbase, the bolt pattern, or the drivetrain.

Raising the frame creates room inside the wheel wells for larger tires. The higher ride height also lifts the battery tray, the differential, and the frame rails above stumps, ruts, and curbs.

The center of gravity rises with the frame, so cornering feels different than at stock height. Every system that connects to the wheels is covered in the EZGO Golf Cart Parts Guide, which shows how the suspension ties into steering and braking.

How Does Lift Height Relate to Tire Size?

The EZGO TXT, RXV, and Valor share a 4 x 4 inch bolt pattern and 1/2 inch x 20 lug studs, so wheel fitment stays the same at any lift height. Tire diameter is the number that changes with the kit. A 2 inch lift opens room for tires slightly over 20 inches. A 4 inch or 5 inch lift clears the 23 inch tires most owners want for a full stance.

Overall tire height, not wheel diameter, decides whether a lift is needed, and the golf cart tire sizing guide explains how to read sidewall numbers.

How Do You Choose the Right EZGO Lift Kit for Your Model?

Choosing an EZGO lift kit follows three checks in order: cart model, powertrain, and lift height. TXT owners have one OEM option, while RXV and Valor owners choose between a gas kit, an electric kit, and the 5 inch Ultimate.

Model comes first because the TXT and RXV use different spindles and rear geometry. Powertrain comes second because the EX1 engine and the electric motor sit differently on the rear frame.

Height comes last. A 2 inch lift suits a neighborhood cart, while a 4 or 5 inch lift suits owners who want 23 inch tires and regular trail use. The full lineup of springs, bushings, and spindles is covered in the EZGO Suspension and Steering Parts Guide.

With more than 2,000 online reviews and a near perfect rating, Carts & Parts has walked thousands of owners through the same choice. Michael Patterson decided on the spot:

"Great experience!!! Walked right into the cart we wanted!!! Very friendly and low pressure!! Decided it needed a lift and different wheels and picked it up a couple days later!!! They all went above and beyond for us!!! Can't wait to go back for some accessories!!!"

What Is Your Installation Plan?

Installing an EZGO lift kit on a TXT or RXV goes smoothly when the prep happens before the box arrives.

1. Confirm the model and year from the serial plate using the EZGO serial number list.
2. Identify the powertrain, since gas and electric RXV kits carry different part numbers.
3. Gather a rated floor jack, four jack stands, wheel chocks, a torque wrench, and a socket set.
4. Order the OEM kit, then torque every fastener to the factory spec during assembly.

Bill Klingel handled his service work first and lined up the lift for the next window:

"Very nice experience with great customer communication. Fast repair service. Will be getting a lift kit out on after camping season!"

Which TXT Lift Kit Adds Clearance Without a Tall Stance?

The OEM EZGO Golf Cart TXT 2-Inch Lift Kit, PN# 611889, is designed for TXT owners who drive on pavement most of the time and want extra clearance for gravel lanes or sloped driveways.

Two inches is enough to move from the stock 18 x 8.5-8 tire to something slightly taller without rubbing. Owners who want a 23 inch tire on a TXT need a taller kit, which is a conversation to have before ordering tires.

💡 Tip: Measure your current tire from the ground to the top of the tread before choosing a lift. Add the lift height to that number to find the tallest tire the cart can clear.

Does the TXT 2 inch lift kit fit gas and electric carts?

The OEM EZGO TXT 2-Inch Lift Kit (PN# 611889) fits both gas and electric TXT models. Confirm the model year with your serial number before ordering.

Can a 2 inch lift run 23 inch tires?

A 2 inch lift on an EZGO TXT does not clear 23 inch tires. Tires in that range need a 4 to 6 inch lift, depending on the model.

Which 4 Inch Lift Kit Fits a Gas RXV or Valor?

The OEM EZGO 4-Inch Lift Kit for RXV/Valor EX1 Gas (PN# 10047543) fits 2022 to 2025 carts running the EX1 closed loop EFI engine. The kit uses a drop spindle front with rear brackets that are powder coated black.

The OEM EZGO 4-Inch Lift Kit RXV/Valor EX1 Gas 2022 to 2025, PN# 10047543, is the same 4 inch lift Carts & Parts installs on new lifted Valor builds with 14 inch wheels and 23 inch tires.

Drop spindles lower the hub relative to the frame, raising the cart without changing suspension travel.

Gas and electric kits are not interchangeable. The EX1 engine and its exhaust routing sit differently than the electric motor, so the rear brackets are shaped to match.

⚠️ Important: Check the engine before ordering. A Valor with the EX1 engine takes PN# 10047543. An electric Valor or RXV takes PN# 10047547. The brackets look similar in the box but mount differently.

Which 4 Inch Lift Kit Fits an Electric RXV or Valor?

The OEM EZGO 4-Inch Lift Kit for RXV/Valor Electric (PN# 10047547) is the factory 4 inch lift for 2022 to 2025 electric carts, including 48V and ELiTE lithium models. The kit raises the cart 4 inches and clears 23 inch tires.

Electric carts carry the motor low on the rear frame, and the OEM EZGO 4-Inch Lift Kit RXV/Valor Electric 2022 to 2025, PN# 10047547, is shaped around that layout. Owners running a rear seat kit or a cargo box benefit most from the clearance.

Torque values for each model year appear in the official E-Z-GO owner's manuals. Pull the manual before the first bolt comes off.

✅ Good to Know: A 4 inch lift on an electric RXV does not change the charger, the controller, or the motor. Range and speed stay the same until you change tire diameter, which alters the effective gear ratio.

When Does a 5 Inch RXV Lift Make Sense?

The OEM EZGO RXV 5-Inch Ultimate Lift Kit (PN# PF11705) is the tallest factory kit, fitting 2013.5 and newer electric RXV carts with a bolt on design that needs no cutting or welding.

Five inches is the choice for maximum clearance and the largest tire package.

The OEM EZGO RXV 5-Inch Ultimate Lift Kit, PN# PF11705, suits owners who run trails, fields, or farm roads and want the cart to clear obstacles that a 4 inch kit would still contact.

The extra inch also raises the center of gravity. Owners who mostly drive pavement often find 4 inches gives the same 23 inch tire fit with a more planted feel in corners.

Does the 5 inch Ultimate kit fit a gas RXV?

The OEM EZGO RXV 5-Inch Ultimate Lift Kit (PN# PF11705) is listed for electric RXV models from 2013.5 forward. Gas RXV and Valor owners should use the 4 inch gas kit, PN# 10047543.

Is welding required for the 5 inch kit?

No welding or cutting is required. The PF11705 kit bolts to the existing frame mounts with the supplied hardware.

How Do You Install an EZGO Lift Kit Safely?

Installing an EZGO lift kit on a TXT or RXV takes most owners three to five hours with a rated floor jack, four jack stands, and a torque wrench. Every step happens with the cart on stands, never on the jack alone.

Lift points matter as much as the kit. The how to jack up a golf cart guide shows the frame rail locations and the marks EZGO stamps near approved points on the RXV.

Follow this sequence:

1. Park on level concrete, set the parking brake, and chock the wheels that stay down.
2. Disconnect the battery pack, or the battery and spark plug wire on gas carts.
3. Lift the front at the frame rail, set stands, and remove the wheels.
4. Replace the stock spindles with the kit components as the instruction sheet shows.
5. Repeat at the rear, installing the new axle brackets.
6. Reinstall wheels, lower the cart, and torque lug nuts and kit hardware to spec.
7. Check toe alignment, drive slowly for a few miles, then recheck every fastener.

Federal workplace rules for jacks, published by OSHA under 29 CFR 1910.244, require a jack rated for the load and require the raised load to be blocked at once. Home installers benefit from the same discipline.

🚨 Warning: Never work under a cart held only by a floor jack. Hydraulic jacks can bleed down without warning. Rated stands go under the frame before any hand goes under the cart.

Is a TXT Lift Kit Different From an RXV Lift Kit?

A TXT lift kit and an RXV lift kit are built for two different chassis and never interchange. The TXT rides on a leaf spring rear with a solid axle, while the RXV uses independent front suspension with A-arms and its own rear geometry.

Symptom: Brackets that do not line up with the frame holes.

Cause: The kit was designed for the other platform.

What it means: The part number is the problem, not the cart.

The RXV front spindle mounts to an A-arm, which is why RXV kits use drop spindles that keep the arms in their factory positions. Owners with a Valor should treat it as an RXV for lift kit purposes, since the two share the same frame and suspension.

What Happens If You Run Big Tires Without the Right Golf Cart Lift Kit?

Running oversized tires on an unlifted EZGO or on a golf cart lift kit that is too short damages more than the tread.

• Sidewalls rub the fender or leaf springs on every turn, generating heat that weakens the rubber.
• Leaf spring bushings and tie rod ends wear early from the added leverage of a taller tire.
• The cart bounces on rough ground because the suspension cannot manage the tire weight.
• Handling turns unpredictable when a tire contacts the body mid corner and briefly loses traction.

The order matters: pick the lift, then pick the tire that fits the lift.

What Does a Properly Lifted EZGO Look Like?

A properly matched EZGO lift kit and tire package gives a TXT, RXV, or Valor a level stance, full wheel wells, and clearance that handles gravel, ruts, and curbs without contact.

Owners who match kit to model and tire to kit report:

• Full wheel wells with no gap above the tire and no rubbing at full lock.
• Clean clearance under the frame rails, battery tray, and differential on rough ground.
• Steady handling once the toe is set and every fastener is torqued.
• A stance that matches the wheels they chose, whether 10, 12, or 14 inch.

Wheel and tire pairing for each lift height is covered in the EZGO wheels and tires guide.

Scott Reagan ordered from across the country and was back on the road in three days:

"Much to my surprise, I get a text message asking how they could help within minutes of my request. What was obviously a "real" person answered my shipping question, then informed me that the part was in stock and could ship out the next morning. Here I am, 3 days later, on Wednesday and I find the part on my doorstep. 3 days after the order and my free shipping package is actually on my doorstep!!!!!! To top it all off, after a quick install of the part, my cart is back on the road!! YeeHaw!! As a retired senior, I had almost forgotten that this is how customer service used to be. So refreshing to know that there are still businesses out there that are actually working hard to please the customer. I will definitely be back for all my cart needs in the future. My package even included a handwritten note from Cade, thanking me for my business and asking me to call him if I had any questions. CADE, This is MY message to you, GREAT JOB, KEEP UP THE GOOD WORK!!!!!"

Get Professional EZGO Lift Kit Help

Carts & Parts is an authorized E-Z-GO dealer in Union City, Indiana, shipping genuine OEM lift kits nationwide from carts-and-parts.com with free shipping on orders over $50.00.

Owners in East Central Indiana and Western Ohio can skip the shipping and have the kit installed in our shop. See the Union City golf cart lift kit installation page for what the service includes.

Cade and Cole confirm the part number against your serial number before anything ships, so the kit that arrives is the kit that fits. More than 2,000 online reviews with a near perfect rating back that promise.

Call or text (937) 459-8891 with your model and year.

Frequently Asked Questions About EZGO Lift Kits

What size tires can I run after a 2 inch, 4 inch, or 5 inch EZGO lift?

A 2 inch TXT lift clears tires slightly over 20 inches in overall diameter. The 4 inch RXV and Valor kits and the 5 inch Ultimate both clear 23 inch tires, the size we pair with 14 inch wheels on lifted builds.

Does one lift kit fit both gas and electric RXV models?

No. The EX1 gas kit, PN# 10047543, and the electric kit, PN# 10047547, use different rear brackets because the engine and motor sit in different positions. We confirm your powertrain from the serial number before shipping.

Can I install an EZGO lift kit myself?

Yes, with a rated floor jack, four jack stands, a torque wrench, and a level concrete floor. Most owners finish in three to five hours. You can also bring the cart to our Union City shop and we handle the installation and alignment.

Do I need an alignment after installing a lift kit?

Yes. Changing spindles shifts the toe setting on both the TXT and RXV. Set the toe after the cart is back on the ground, then drive a few miles and recheck every fastener.

Will a lift kit void my EZGO warranty?

Genuine OEM E-Z-GO lift kits are designed for these carts. Warranty terms on individual components vary by model year, so check your owner's manual or call us with your serial number before installation.

Does the TXT 2 inch kit fit a Medalist?

The OEM EZGO TXT 2-Inch Lift Kit, PN# 611889, is listed for TXT gas and electric models. Medalist carts share much of the TXT platform, but we verify fitment by serial number before shipping.

Do I need new wheels with a lift kit?

Not always. The 4 x 4 inch bolt pattern stays the same, so stock wheels still mount. Most owners choose 12 or 14 inch wheels with 23 inch tires after a 4 or 5 inch lift.

Does a lift change how the cart brakes and corners?

Yes. A taller cart carries its center of gravity higher, so cornering needs a slower approach. Larger tires also change the effective gear ratio, which affects acceleration and braking distance.

Is a lifted golf cart still legal to drive on the road?

Street use depends on state and local rules rather than the lift itself. Low speed vehicle standards under FMVSS No. 500 set equipment requirements, and some states limit vehicle height. Check your local rules before driving a lifted cart on public roads.

How long does a lift kit installation take at Carts & Parts?

Most EZGO lift kit installations are completed within a few days once the cart is in our shop and the kit is in stock. We can pair the lift with wheels and tires in the same visit.