The ezgo txt tie down bolt is the long stainless steel fastener that anchors the front body of your TXT cart to the steel frame. A loose front cowl rattles over every bump and seam in the road. A missing bolt lets the body shift and stresses the panels around it. A rusted, seized bolt snaps during removal and leaves you stuck partway through the repair.
Few things feel as frustrating as a body that still wobbles after you thought the repair was finished. Owners often replace panels and brackets while the real culprit sits in plain sight.
Correct body mounting hardware keeps the cart tight, quiet, and safe to drive around your property, community, or worksite. Using the right OEM bolt the first time saves you a second teardown.
Three problems push owners to replace this hardware:
- Corrosion locks the threads and rounds the bolt head during removal.
- Vibration backs the bolt out until the body shifts on the frame.
- A previous repair left the wrong length bolt, or no bolt at all.
Carts & Parts stocks the genuine OEM hardware and helps you confirm fitment before you buy. Below, you will learn what the ezgo txt tie down bolt does, how to confirm fitment, and how to install it correctly.
Key Takaways
What is the EZGO TXT tie down bolt?
The EZGO TXT tie down bolt (PN# 01101G01) is a stainless steel body fastener that secures the front body to the frame on TXT carts. The bolt measures 9.97 inches long and resists rust far better than plated steel hardware. Carts & Parts stocks the genuine OEM version for 1994 to 2022 TXT models.
What years and models does PN# 01101G01 fit?
PN# 01101G01 fits EZGO TXT carts built from 1994 to 2022, covering both gas and electric models on the TXT platform. Body hardware can vary by configuration, so confirm your serial number and manufacturer code before ordering.
Is the body tie down bolt the same as the battery hold down bolt?
The body tie down bolt (01101G01) and the battery hold down bolt (70386G01) are two different parts that owners frequently confuse. The body bolt anchors the front body to the frame, while the J-shaped battery bolt secures the battery pack through a plastic hold down panel. Ordering by part number prevents the mix up.
What Is the EZGO TXT Tie Down Bolt and Why Does It Matter?
The EZGO TXT tie down bolt anchors the front body assembly of TXT, Medalist, and Workhorse style carts to the steel frame, holding the cowl, dash, and front panels seated under constant vibration. A single bolt carries more load than most owners expect, because road seams and rough terrain shake the body thousands of times per outing.
Body fasteners live in the part of the cart that meets the most weather, mud, and washdown spray. Plated hardware corrodes, while the stainless OEM bolt keeps its threads clean for the next service. For a complete look at every major system, the EZGO Golf Cart Parts Guide covers compatibility and fitment across all models.
How does body mounting hardware keep a TXT solid?
Body mounting hardware on the EZGO TXT works as a system: the tie down bolt, the floor mat, the lower floorboard, and the frame brackets share the load that vibration creates. When one bolt loosens, the rest of the system absorbs uneven stress, which accelerates rattles and panel cracking.
Catching a loose or missing bolt early keeps that chain reaction from starting. Owners who confirm the correct part number avoid the most common cause of repeat repairs.
| Specification | Body Tie Down Bolt | Battery Hold Down Bolt |
| Part number | 01101G01 | 70386G01 |
| What it secures | Front body to the steel frame | Battery pack through a plastic panel |
| Shape and length | Straight bolt, 9.97 inches long | J-shaped hook |
| Material | Stainless steel | Plated steel |
| Fitment | EZGO TXT, 1994 to 2022 | 1996-up TXT, Medalist, Shuttle, ST Express |
Table data sourced from E-Z-GO OEM part listings and Carts & Parts product specifications.
How Do You Know You Are Buying the Right OEM Bolt?
The EZGO TXT Tie Down Bolt (PN# 01101G01) is the genuine E-Z-GO part that matches the factory length, thread pitch, and stainless steel grade for TXT carts built between 1994 and 2022. Aftermarket substitutes often arrive in the wrong length or a softer plated steel that seizes within a season.
Buying OEM removes the guesswork. With more than 2,000 online reviews and a near perfect rating, Carts & Parts has built its reputation on parts that fit correctly the first time.
When Ed Greenrod needed his cart back on the road, he found exactly how smooth a correct OEM fit can be:
“Carts and Parts were a great help with getting my cart back up and going. The part fit perfect, worked perfect, the price point of my part was great and the process was easy. I recommend them for sure. The coozies were a nice add.”
What Steps Confirm Fitment Before You Order?
Confirming fitment on an EZGO TXT starts with your serial number and manufacturer code, not the model year alone. Body configurations shifted across the 1994 to 2022 run, so a quick check prevents a wrong part and a return.
- Locate the serial plate, usually on the passenger side dash area or the frame rail on newer carts.
- Photograph the serial number and the manufacturer code stamped beside it.
- Match your numbers against the EZGO Serial Number Lookup guide, or send the photo to our team.
- Confirm whether your prior bolt was the body fastener or the separate battery hold down bolt.
What Does the EZGO TXT Tie Down Bolt Actually Secure?
The EZGO TXT tie down bolt secures the front body assembly to the frame, working alongside the OEM floor mat, lower floorboard, and rocker panels that sit above the front leaf spring mounts. Reaching the bolt means pulling the floor mat back, the same step shown in E-Z-GO body service procedures.
A worn or curling floor mat hides moisture against the floorboard and the bolt heads below. Replacing it during a body service protects the hardware you just cleaned up. The OEM EZGO TXT Floor Mat Without Horn Hole (PN# 637535G01) is a mold and mildew resistant one-piece mat that drops in without modification.
For factory torque guidance and body component references, the E-Z-GO TXT 48V Owner’s Manual lists the vehicle identification numbers and maintenance notes for your platform.
💡 Tip: Photograph each panel and bolt before removal. A reference photo makes reassembly faster and confirms which bolt length came from which location.
Which Front End Parts Should You Inspect at the Same Time?
Front end inspection on a TXT pays off most when the body is already open, since the 4-bolt hub assembly, wheel bearings, and spindle sit right there for a visual check. A worn hub transfers stress to the spindle and brake drum, so catching it now prevents a larger bill later.
The OEM EZGO 4 Bolt Hub Assembly (PN# 70895G01) is the genuine front wheel hub that maintains proper suspension geometry and handling. E-Z-GO recommends replacing the race bearings whenever existing bearings show wear during a hub service.
Robert Toles described the same confidence many owners feel when they order genuine OEM hardware online:
“Search the online for a new Motor Brake for my EZGO RXV. Carts & Parts had the OEM part at a great price. I’m someone that’s a little leery of order in anything online for the obvious reasons. The Part arrived fast and was exactly what I had expected, an original OEM part. I’m extremely happy with the service I received and would recommend Carts & Parts as a company you can trust. 5 🌟”
Do you replace the wheel bearings with the hub?
Wheel bearings should be replaced with the 4-bolt hub assembly whenever the existing bearings show pitting, roughness, or play. E-Z-GO calls for fresh race bearings during a hub service to protect the new hub and restore smooth rotation.
⚠️ Important: Never reuse a rounded or stretched bolt to save time. A compromised fastener can back out under load and let the body shift while you drive.
How Do You Install a TXT Tie Down Bolt Correctly?
Installing a TXT tie down bolt correctly comes down to clean threads, the right length, and even clamping force across the front body. Rushing the step is what leaves a cowl rattling a week later.
- Soak a corroded bolt with penetrating oil, then back it out slowly with a six point socket to avoid rounding the head.
- Clean the frame threads with a thread chaser and clear out debris and old corrosion.
- Seat the genuine OEM bolt by hand first to confirm the threads start straight.
- Tighten to a firm, even torque, then recheck after your first few outings.
Customers tell us the install support matters as much as the part. Diane Reidy shared how our team walked her through a fitment before she ordered:
“I orderd a glove box for my EZ GO golf cart. The price was much better from Carts & Parts then anywhere else I could find. I was totally impressed with the customer service I recieved from them . They video & texted me to make use the instructions were clear for installation. I would not think twice about buying from them again.”
For model specific safety notes and identification details, the E-Z-GO Owner’s Manuals library lets you download the exact guide for your cart.
What Steering Hardware Pairs With a Front End Service?
Steering hardware sits next to the body bolts, so the tie rod assembly, tie rod ends, and spindles deserve a quick check while the front end is accessible. A bent or worn tie rod throws off toe alignment, which chews through tires and pulls the cart to one side.
The OEM EZGO Tie Rod Assembly, 26.44 Inch (PN# 70876G02) connects the front wheel spindles and restores accurate steering response. Tie rod length varies with spindle type, brake setup, and lift kits, so measure your existing rod center to center before ordering.
What Tie Down Hardware Matters When You Tow a TXT?
Towing a TXT behind another vehicle relies on the tow bar tie rod assembly, a steering link that keeps the front wheels tracking straight during transport. A worn tow bar tie rod lets the front end wander, which stresses the steering components and the tow setup.
The OEM EZGO Tow Bar Tie Rod Assembly (PN# 646856) is the genuine factory replacement that maintains alignment and stability while you tow. Replacing a worn unit reduces stress on the surrounding hardware and keeps transport predictable.
Do ELiTE Lithium TXT Models Need Different Hardware?
ELiTE lithium TXT carts share the same body mounting hardware as gas and lead acid models, but their advanced battery system adds electrical components that lead acid carts do not have. The state of charge harness is one of those lithium specific parts, and it reports battery data to the display.
The OEM EZGO TXT ELiTE State of Charge Harness (PN# 656773) carries the correct connectors and wire lengths for ELiTE advanced battery systems. A damaged harness reports inaccurate charge levels, so inspect it if your display readings drift.
✅ Good to Know: Body fasteners on an ELiTE TXT torque the same as on any TXT. Only the electrical and battery components differ between lithium and lead acid carts.
What Happens If You Ignore Loose or Missing Tie Down Bolts?
Loose or missing tie down bolts rarely stay a small problem, because the front body keeps moving until the surrounding parts wear and crack. Putting off a simple bolt replacement turns into a panel and bracket repair.
- Persistent rattles signal the body shifting against the frame on every bump.
- Cracked panels develop where unsupported plastic flexes past its limit.
- Stripped frame threads form when a loose bolt wallows out its mount.
- Compromised safety follows a body that no longer sits square on the chassis.
What Does a Properly Mounted TXT Body Look Like?
A properly mounted TXT body sits tight, quiet, and square on the frame, with the cowl, dash, and panels flush at every seam. Owners notice the difference the moment the rattles disappear.
- The front body stays silent over seams, gravel, and rough terrain.
- The panels line up flush with even gaps at the cowl and dash.
- The stainless hardware releases cleanly at the next service instead of seizing.
- The cart drives confidently around your property, community, or worksite.
Pairing the right body hardware with matching upgrades keeps the whole cart looking and feeling finished. Browse the full lineup in the EZGO Golf Cart Accessories hub.
Get Professional EZGO TXT Tie Down Bolt Help
Carts & Parts is a family owned, authorized E-Z-GO dealer shipping genuine OEM parts nationwide with free shipping on qualifying orders over $50. Our team confirms your fitment by serial number, so you order once and install with confidence. Call or text (937) 459-8891, or shop the full catalog at carts-and-parts.com, and put the right OEM hardware on your cart today.
Frequently Asked Question About EZGO TXT Tie-Down Bolt
What is the EZGO TXT tie down bolt and what does it secure?
The EZGO TXT tie down bolt (PN# 01101G01) is the stainless steel fastener that secures your TXT cart’s front body to the steel frame. We supply the genuine OEM part for 1994 to 2022 models. Call us and we confirm your fitment before you order so the bolt seats correctly.
What years does PN# 01101G01 fit?
PN# 01101G01 fits EZGO TXT carts built from 1994 through 2022, including gas and electric models on the TXT platform. We recommend verifying your serial number and manufacturer code first, because body configurations changed across that span. Send us a photo and we confirm it for you.
How long is the EZGO TXT tie down bolt?
The EZGO TXT tie down bolt measures 9.97 inches long and is made of stainless steel for corrosion resistance. We stock the OEM length so the bolt threads fully into the frame mount without shimming or cutting. Matching the factory length keeps the front body tight and properly seated.
Is the tie down bolt the same as the battery hold down bolt?
No, the body tie down bolt (01101G01) and the battery hold down bolt (70386G01) are different parts. The body bolt anchors the front body to the frame, while the J-shaped battery bolt secures your battery pack through a plastic panel. We help you order the correct one by part number.
What is the TXT body bolt made of?
The TXT body bolt is made of stainless steel, which resists the rust and thread seizing that plated hardware develops after years of moisture exposure. We supply the genuine OEM grade so the bolt holds torque and releases cleanly at the next service. Stainless hardware lasts longer in wet climates.
How do you remove a corroded or seized tie down bolt?
You remove a seized tie down bolt by soaking the threads with penetrating oil, then turning slowly with a six point socket to avoid rounding the head. We carry the OEM replacement so a snapped bolt does not sideline your cart. Call us and we walk you through the removal steps.
Should you replace tie down bolts in pairs?
We recommend replacing tie down bolts in matched sets when both show corrosion or rounding, since hardware that ages together tends to fail together. Replacing both keeps clamping force even across the front body. You avoid a second teardown a few weeks later when the other bolt finally seizes.
Does this bolt fit an RXV?
No, PN# 01101G01 is specific to the EZGO TXT body platform and does not fit the RXV, which uses different body mounting hardware. We stock RXV specific parts separately and confirm compatibility for you. Tell us your model and year, and we point you to the correct body hardware.
What other parts are worth inspecting during a TXT body service?
During a TXT body service, we suggest inspecting the floor mat, the 4-bolt hub assembly, and the 70876G02 tie rod assembly while the front end is accessible. Catching worn steering or suspension parts now saves a return trip. We can bundle the OEM components you need into one shipment.
Do you get free shipping on the EZGO TXT tie down bolt?
Yes, you get free shipping on qualifying parts orders over $50, and the price you see is the price you pay with no hidden fees. We ship genuine OEM EZGO parts nationwide from our Indiana location. Call or text us at (937) 459-8891 with any fitment question before you order.
